HTECH 250 LPH  RO Plant

HTECH 250 LPH RO Plant model is starting RO range in commercial RO plant segment with universal industry standard size of 4040 membrane.  

It has single "4040" RO Membrane that gives a fantastic long lasting performance to the client requirement. 

It has flow rate of 250 liter per hour with the duty cycle of 2000 ltr per day. 

HTECH RO PURIFIER  has high demand in Schools, Hospitals, Industries, corporate offices etc. 

The running cost of maintenance is also low as compared to 100 lph RO Plant. The below information shows the design and specification of 250 LPH RO Plant . 

Design  Basis of R O System  

1. Plant Capacity :

The Reverse Osmosis Plant has been designed to produce the desired output of 250 Liters per Hour.  

1. Raw Water analysis :

The Reverse Osmosis System is designed on following raw water analysis as indicated below ;

1. Plant Design Basis and Conditions :

• We have designed this system to produce permeate flow 250 Liters per hour.
• The treated water quality as required i.e pH 7-8 after correction ,TDS <100 PPM & Hardness < 50 PPM can be achieve , subject to the feed water quality is the same as specified above .In case of any change in the quality of raw water it may have implication on operating parameters or on end results of the system.
• The system of recovery is properly maintained corresponding to the raw water TDS.
• RO feed water limiting conditions as mentioned below are strictly maintained,

    SCOPE OF SUPPLY  

                 TECHNICAL SPECIFICATIONS     Flow Rate   Treated Water :           

250 LPH  based on TDS level upto 2500 PPM    

• Raw Water Pump

  Specifications

• Horizontal Centrifugal
• Power Required : 0.5 HP
• Make : ddg.
• Quantity : 1 No

• MEDIA FILTER

Specifications

• Make : Pentair / Aventura
• Material of Construction : FRP
• Dia & Length : 10*54
• Testing Pressure :6 Kg/cm2
• Opening : Top
• Quantity : 1 No
• Valve : Multiport Type Lever Type
• Size : ¾ Inch
• Maximum Flow : 2000 LPH
• Media : Gravel, Pebbles ,Quartz Sand ,Anthracite etc.
• CARBON FILTER

Specifications

• Make : Pentair / Aventura
• Material of Construction : FRP 10*54
• Testing Pressure :6 Kg/cm2
• Opening : Top
• Quantity : 1 No
• Valve : Multiport type, Lever tpye
• Size : ¾ Inch
• Maximum Flow : 2000 LPH
• Carbon : Acid wash with 1100 + ID valve
• MICRON FILTER

Specifications                 Cartridge Filter & Housing   Big Blue Housing :

• Make : Imported in PP
• Length & Diameter : 20”*4”
• Quantity : 2 Nos

  Cartridge :

• Make Ametek USA in PP
• Length : 20”
• Micron Rating : 05 Micron
• Quantity : 2 Nos
• DOSING SYSTEM

Specifications

• MOC: PP
• Capacity : 06 LPH
• Pressure : 10 psig
• Qty : 1 No

Ø  Make : E Doze

• HIGH PRESSURE PUMP

Specifications

• MOC : Stainless Steel
• Type : Vertical
• Flow Rate : 1 M3
• Power Required : 1 Phase ,1.1 Kw
• Make : Sumo/CRI/Nangfang
• RO MEMBRANE

Specifications

• Type : Spiral Wounded
• & Length : 40*40
• No membrane : 1 No
• Recovery : Approx 30 %
• Make of membrane : Dow/ Hydranautics
• Salt rejection : 95-98 %
• RO PRESSURE TUBE

Specifications

• MOC : FRP Composite
• Pressure Vessels : 1 No
• No of membrane per vessel : 1 No
• Make : Water Life.

  C I P SYSTEM ( Optional at Extra cost )

Specification

• With R W Pump & FRP Tank : 1 No , 100 Liter

• ELECTRICAL PANAL

Specifications

• Complete starters, overload relays , single phase prevention for pump.
• Voltmeter , Ammeter , MCB’s , indicating lights
• Push buttons
• Rocker Switches for Dozers
• Incomers, Auto- Manual Switches

   INSTRUMENTATION

Specifications

• Rota Meter : 2 nos (permeate & Reject line )
• Make : Flowstar , Vats
• Digital TDS/ Conductivity Meter 1 no at extra cost
• Make : Vats India
• Pressure Switch : 2 Nos
• Make : Indfoss/Denfoss
• Pressure Gauges : 2 Nos
• Make : Gluck/ Guru

PLUMBING & FITTING

• Pipelines upvc
• NRV’s pressure relief valves , where needed .
• The system with be on common MS base frame or  SS as per Direction of Client.